Disinfection Sprayer Hand Watering Sprayer Garden Pressure Sprayer (Ht-2L015)

Disinfection Sprayer Hand Watering Sprayer Garden Pressure Sprayer (Ht-2L015)

How to use compression sprayer (L) Before using the new sprayer, remove the pressure cover, drip a little oil into the air cylinder to lubricate the cup, and then install each part in sequence. Pay attention to install the gasket at each joint before tightening. (2) Before use, add fresh water,...
We are determined to continuously improve and innovate our Round Jaw Locking Pliers, Spirit Level With Bubble, Wooden HandLe Claw Hammer, insisting on our research and development strength and treating our customers honestly. In the future development, our company will further improve the industrial mechanism, strive to enhance the technical strength, actively innovate, and continue to optimize the quality of our products. We hope to cooperate with more customers for mutual development and benefits. We will continue to develop, to provide the high-quality products and services, and promote lasting cooperation with our customers and create a better future. We have a vigorous sales and comprehensive technical team.

CA-8807 

Pressure Sprayer

A hand sprayer is an appliance that uses air suction to turn a potion or other liquid into a mist and spray it evenly onto other objects. It is composed of compressed air device, thin pipe, nozzle, etc. In rural areas, sprayers are indispensable to the prevention and control of pests and diseases.

Also we do accept OEM packing.


Material

Plastic

Size

1L, 1.5L, 2L, 3L

Packing

OPP bag, or Color box

MOQ

1200pcs


How to use compression sprayer

(L) Before using the new sprayer, remove the pressure cover, drip a little oil into the air cylinder to lubricate the cup, and then install each part in sequence. Pay attention to install the gasket at each joint before tightening.


(2) Before use, add fresh water, tighten the bleed bolt on the upper part of the instrument, hold the iron handle with your hand, and press down 30 to 50 times (the pumping plug should be stable when pumping up, and each stroke should be Pull the foot, press the foot), turn on the switch to spray, check whether there is water leakage and air leakage at the joint of each pipeline, and observe whether the spray is normal. If it is normal, you can work in the field. If the spray is not good, or there is water leakage or air leakage, repair it first.


(3) If there is a slight air leak in the water filling cap, shake the barrel a few times to bring the water into contact with the tank cap to enhance the seal of the tank cap, and then continue to pump up to increase the pressure in the tank. The greater the pressure, the tighter the water cap.


(4) When pouring fresh water or potion, do not exceed the height line of the potion marked on the outside of the device to ensure the storage of compressed air and generate pressure. When adding medicine, the medicine liquid should be filtered to prevent impurities from blocking the spray hole.


(5) When repairing occurs, the bleed nut should be loosened to release compressed gas. Otherwise, the medicine liquid will rush out and cause harm to people and animals.


(6) When installing the leather cup, half of the leather cup should be placed diagonally in the air cylinder, and then it should be rotated, and the vertical plug rod should be gradually rotated.


(7) In order to ensure trouble-free use and prolong the service life of the sprayer, the remaining liquid must be poured out after each use. When pouring the medicine, the tension nut should be loosened, the tightening screw should be pressed to compress the barrel Let the air run out; then unscrew the water cap, pour out the liquid medicine, and then wash it with clean water. After spraying highly corrosive liquids or emulsions, or before long-term storage, use alkaline water to clean the inner and outer surfaces of the sprayer, then rinse with clean water (preferably warm water), and spray air to clean the inside of the hose and spray bar. Open the lid of the bucket, pour out the accumulated water, and lay the water connector down, and dry the bucket to prevent rust. At the same time, the neck screws should be dried and oiled to prevent rust; the hose should be hung up and the two ends sag; the spray rod should be stored upright, the spray head should be upward, so that the accumulated water flows out.


(8) The sprayer should be stored in a cool and dry place, and should not be stacked with corrosive materials such as pesticides and fertilizers


C&A TOOLS COMPANY SHOW<>

image009(001)


TRANSPORTATION<><>

image012

With a complete scientific quality management system, good quality and good faith, we win good reputation and occupied this field for Disinfection Sprayer Hand Watering Sprayer Garden Pressure Sprayer (Ht-2L015). Our company will make unremitting efforts to meet the needs of customers, and strive to create a unique corporate character in terms of product quality, diversified varieties and sales services, and provide you with 'excellent and beautiful' products and services. While using the improvement of society and economy, our corporation will retain a tenet of 'Focus on trust, high quality the first', moreover, we count on to make a glorious long run with each and every customer.
Hot Tags: pressure sprayer, China, suppliers, factory, wholesale, customized, low price, German Type Stoning Hammer, Spirit Level With Bubble, Wooden HandLe Claw Hammer, Hand Sprayer, Brass Plated Iron Padlock, Wire Stripper