Saw Blade Usage Requirement

Saw Blade Usage Requirement

Date:Oct 13, 2020

Work, the workpiece should be fixed, profile positioning in line with the direction of the draft, so as not to cause abnormal cutting, don't apply side pressure or curve cutting, feed should be stable, avoid impact blade contact work piece, resulting in saw blade damage, or work piece flying out, accident.

During work, if any abnormal sound or vibration, rough cutting surface, or peculiar smell occurs, the operation shall be terminated immediately. After timely inspection, any trouble shall be removed to prevent any accident.

3. When starting and stopping cutting, do not feed the knife too quickly to avoid breakage and damage.

4. If cutting aluminum alloy or other metals, special cooling lubricant should be used to prevent overheating of the saw blade, tooth paste and other damage, which will affect the cutting quality.

Equipment chip discharge tank and slag suction device to ensure smooth, in case of slag accumulation into chunks, affecting production and safety.

When pictures of cutting, please do not cut for a long time straight, so as not to affect the service life of the saw blade and cutting effect;

Wet cutting, should add water cutting, beware of leakage.

Previous: The Historical Origin Of The Axe

Next: Classification And Introduction Of Fitter's Hammer