The product of the octagonal hammer manufacturer is a round hammer surface, and its use range is quite wide. It often leaves a circle forming a semicircular mark when hitting a flat part. There are some precautions when using it. To understand.
In order to have a certain degree of flexibility when hitting, the manufacturer makes the middle and top part of the handle slightly narrower than the end when making the octagonal hammer. When using the sledge hammer, you must pay attention to the front and back, left and right, up and down when using the sledge hammer. It is strictly forbidden to stand in the range of the sledge hammer, and it is not allowed to use the sledge hammer and the small hammer to hit each other. It should also be noted that the connection between the hammer head and the hammer handle must be firm. If there is a slight looseness, the hammer should be tightened or replaced with a wedge immediately. The handle of the hammer must be of appropriate length.
There is another point that manufacturers of octagonal hammers should pay attention to, that is, the hammer head is not allowed to be quenched, cracks and burrs are not allowed in the production, and the flash and burrs should be trimmed in time, so that the effect of the octagonal hammer will be better.